Thermal Silicon Grease Packed In Pin Tube

Thermal Conductive Silicone Grease is white grease mixture of the organic silicon grease and stuffs with the property of thermal conductivity and insulation .
It is widely used as media of thermally conducting for electronic components such as between the CPU and heat-eliminating machine ,LED tubes with large power and alumiun,copper matetials ,in order to decrease the working temperature .
This product has the property of exellent insulation and thermal conductivity as well as low rate of grease ,convenience to use ,simple process of coating and sealing .
The electronic components coated with this thermal silicon grease has good anti-wet ,anti-dust ,anti- erosion ,anti-shaking properties ,the thermal conductivity can be 0.8,1.4,1.8,3.5(w/m.k) respectivly which is available to different customers
The package for this product is 1kg and 5kg for each package respectively

 

 

TO-220 TO-3P TO-247 TO-3 MICA

Product Name :　MICA
Product Information:
Features： good mechanical strength and heat-resistance
operating temprature scope:within 600℃
usage ： widely used for metallurgy,chemical ,electronic products for the purpose of insulating 　
Typical model: TO-220、TO-3P1、TO-3P2、TO-3PL、TO-3
Notes: different models can be made at customer's request

 

http://www.gdrichone.com/pid9837/TO-220+TO-3P+TO-247+TO-3+MICA.htm

Emerson Cuming STYCAST2850FT

STYCAST 2850FT Emerson&Cuming is formulated from double elements ,a kind of thermally epoxy adhesive sealed ,

with minimal dilatability,outstanding thermal conductivity and electrial insulation.

（thermal rate:1.3） 2850FT is specially designed for appliances in order to heate-liminating and anti-heat impact by combining with other consolidating materials .

The consolidating temperature can vary from room temperature to high temperature according to different consolidating agents.。

2850FT is holding large market share ,widely used for sealing on transducer, especially on heat transducer . Differnt colors are available .

 

http://www.gdrichone.com/pid9868/Emerson%26Cuming+STYCAST2850FT.htm

Thermal Silicone Pad ( No Fiberglass)

Thermal Silicone Pad
With high thermal conductivity, good insulation resistance and voltage resistance, this product can be stampinged and cut into insulation thermal pads according to any particular modal heating appliance.
Usage: used for circuit board to thermal press and conduct. It can replace some imported products, like FUJI. Typical Specification: 0.15T、0.18、0.2T、0.23T、0.3T、0.45T、0.8T、1.0、1.5T and so on.

 

http://www.gdrichone.com/pid176178/Thermal+Silicone+Pad+%28+No+Fiberglass%29.htm

Sil-pad K-6

TYPICAL PROPERTIES OF SIL-PAD K-6

PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD

Color	bluegreen	Bluegreen	Visual
Reinforcement Carrier	Kapton	Kapton	----
Thickness(inch) /(mm)	0.006	0.152	ASTM D374
Hardness (Shore A)	90	90	ASTM D2240
BreakingStrenght (ibs/inch) / (kN/m)	30	5	ASTM D1458
Elongation (%45°toWarp and Fill)	40	40	ASTM D412
Tensile Strength (psi) /(MPa)	5000	34	ASTM D412
Continuous Use Temp (℉) /（℃）	-76 to356	-60 to 180	-----
ELECTRICAL
Dielectric Breakdown Voltage(Vac)	6000	6000	ASTM D149
Dielectric Constant (1000 Hz)	4	4	ASTM D150
Volume Resistivity(Ohm-meter)	1012	1012	ASTM D257
Flame Rating	VTM-O	VTM-O	U.L94
THERMAL
Thermal Conductivity(W/m-K)	1.1	1.1	ASTM D5470
THERMAL PERFORMANCE vs PRESSURE
Pressure(psi) 10 25 50 100 200
TO-220 Thermal Performance (℃/W) 3.24 3.03 2.76 2.45 2.24
Thermal Impedance (℃-in2/W)(1) 0.82 0.62 0.49 0.41 0.36

 

http://www.gdrichone.com/pid11342632/Sil-pad+K-6.htm

Thermal Silicone Pad ( No Fiberglass)

Thermal Silicone Pad
With high thermal conductivity, good insulation resistance and voltage resistance, this product can be stampinged and cut into insulation thermal pads according to any particular modal heating appliance.
Usage: used for circuit board to thermal press and conduct. It can replace some imported products, like FUJI. Typical Specification: 0.15T、0.18、0.2T、0.23T、0.3T、0.45T、0.8T、1.0、1.5T and so on.

 

http://www.gdrichone.com/pid176178/Thermal+Silicone+Pad+%28+No+Fiberglass%29.htm

Thermal Conductive Silicone Grease

It is white grease mixture of the organic silicon grease and stuffs with the property of thermal conductivity and insulation .
It is widely used as media of thermally conducting for electronic components such as between the CPU and heat-eliminating machine ,LED tubes with large power and alumiun,copper matetials ,in order to decrease the working temperature .
This product has the property of exellent insulation and thermal conductivity as well as low rate of grease ,convenience to use ,simple process of coating and sealing .The electronic components coated with this thermal silicon grease has good anti-wet ,anti-dust ,anti- erosion ,anti-shaking properties ,the thermal conductivity can be 0.8,1.4,1.8,3.5(w/m.k) respectivly which is available to different customers
The package for this product is 1kg and 5kg for each package respectively

REVERSE LOCKING CIRCUIT BOARD SUPPORT

Material:

NYLON 66 with UL certificate (Authentic color),

Flammability class:94V-2.

Usage:

First fasten the spacer support with the 5.5mm substrate drilling hole, then push the spacer from down to fasten.

 

http://www.gdrichone.com/pid151692/REVERSE+LOCKING+CIRCUIT+BOARD+SUPPORT.htm

TO-220 TO-3P TO-247 TO-3 MICA

Product Name :　MICA
Product Information:
Features： good mechanical strength and heat-resistance
operating temprature scope:within 600℃
usage ： widely used for metallurgy,chemical ,electronic products for the purpose of insulating 　
Typical model: TO-220、TO-3P1、TO-3P2、TO-3PL、TO-3
Notes: different models can be made at customer's request

 

http://www.gdrichone.com/pid9837/TO-220+TO-3P+TO-247+TO-3+MICA.htm

Thermal Conductive Phase Change Material

Product Name :　thermal phase change material
Product Information:
It is solid under room temperature and easy to be handled ,usually used as cusion on the surface of heat -eliminating sheet or other components .It gets soft under the operating temperature ,so it can be perfect stuff and minimise the heat between the power -consuming electronic parts and thermal conducting sheets ,perfects the performance of the thermal conducting sheets,improves the aliability of CPU ,DC/DC transformer.
Useage:
1，interface between a power transistor, CPU or other heatgenerating component and a heat sink or rail
2，Isolate electrical components and power sources from heat sink and/or mounting bracket
3，Interface for discrete semiconductors requiring low pressure spring clamp mounting
4，Consumer electronics
5，Automotive systems
6，Telecommunications
7，aerospace
8，Military
9，Medical devices
10，Industrial controls 

http://www.gdrichone.com/pid9842/thermal+conductive+phase+change+material.htm

TO-220 TO-3P TO-247 TO-3 Silicone Cap

Description: has the function of supplementary heat dissipation, can be subsituted for original metal block.
No fixed, just set directly to low power and middle power transistor to reduce wight.
Usage: heat dissipation of common low power and middle power transistor 
Typical sizes: TO-220A、TO-220B、TO-220C、TO-3PA

http://www.gdrichone.com/pid9840/TO-220+TO-3P+TO-247+TO-3+silicone+cap.htm

TO-220 TO-3P TO-247 Alumina Ceramic Sheet

Usage:heat-eliminating 
Typical standard specification: TO-220,TO-3P,TO-247,TO-3PL
Notes:different kinds of specifications are available to customers

http://www.gdrichone.com/pid92923/TO-220+TO-3P+TO-247+alumina+ceramic+sheet.htm

BUSHING

Product Name :　Insulating tablets/insulation bushing

Product Information:

Usage ：used for tightening on the heat producing components and for insulating between metal sheet .

especially ,used on screws for insulating purppose ,

combined with the heat-eliminating pad when used Typical

specification：TO-220、TO-220A、TO-220B、TO-220C、TO-220D、TO3

Notes: different specifications are available at customer's request

http://www.gdrichone.com/pid11342616/BUSHING.htm

TO-220 TO-3P TO-247alumina Ceramic Sheet

Usage:heat-eliminating 
Typical standard specification: TO-220,TO-3P,TO-247,TO-3PL
Notes:different kinds of specifications are available to customers

http://www.gdrichone.com/pid92921/TO-220+TO-3P+TO-247alumina+ceramic+sheet.htm

Thermal Silicone Pad ( No Fiberglass)

Thermal Silicone Pad 
With high thermal conductivity, good insulation resistance and voltage resistance, this product can be stampinged and cut into insulation thermal pads according to any particular modal heating appliance.
Usage: used for circuit board to thermal press and conduct. It can replace some imported products, like FUJI.

Typical Specification: 0.15T、0.18、0.2T、0.23T、0.3T、0.45T、0.8T、1.0、1.5T and so on.

http://www.gdrichone.com/pid176178/Thermal+Silicone+Pad+(+No+Fiberglass).htm

Cpu Coolers Pad

Features: can be cut into different shapes and size according to different components ,
with exellent insulation , thermally conductivity ,flexibility ,and good flatness,shock-proof ,sealing ability 
Thermally conductivity :1--4.5W/mK
Dielectroic Breakdown Voltage :above 3000V, 
Thickness:0.5mm~13mm,such as 0.5mm　1mm　1.5mm　2mm一13mm are widely used on many kinds of electronic 
components operating 
temperature range :-50℃～220℃

http://www.gdrichone.com/pid92925/cpu+coolers+pad.htm

LED Lighting Thermal Insulation Pad

LED lighting Thermal Insulation Pad 
1.Thermal Conductivity:1.2w/m.k 
2.Soft and cost effective solution 
3.Low stress application
LED lighting thermal pad
Features&Benefits:
1.1.2--4.5W/m.k thermal conductivity
2.Ultra soft at low Stress application
3.Naturally tacky on both sides
4.Electrically insulating 
Typical Application:
1.VGA Card,Game consoles,Notebook Chip Set
2.LED Lighting,LED Backlight TV,Wireless Hub,Memory Modules,Memory RAM Bus
3.Power suppliers(AC-DC,DC-DC,battery back-up systems)
Configurations:
•Standard size for sheet form:200x400mm
•Thickness:0.25-15.0mm
•With or without PSA
•Could be die-cut or pre-applied to heat sinks
Rohs&Reach compliance:yes,for the certificates,please contact our sales!

http://www.gdrichone.com/pid92927/LED+lighting+Thermal+Insulation+Pad.htm

Sil-pad K-4

TYPICAL PROPERTIES OF SIL-PAD K-4

PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD

Color	GRAY	GRAY	Visual
Reinforcement Carrier	Kapton	Kapton	----
Thickness(inch) /(mm)	0.006	0.152	ASTM D374
Hardness (Shore A)	90	90	ASTM D2240
BreakingStrenght (ibs/inch) / (kN/m)	30	5	ASTM D1458
Elongation (%45°toWarp and Fill)	40	40	ASTM D412
Tensile Strength (psi) /(MPa)	5000	34	ASTM D412
Continuous Use Temp (℉) /（℃）	-76 to356	-60 to 180	-----
ELECTRICAL
Dielectric Breakdown Voltage(Vac)	8000	8000	ASTM D149
Dielectric Constant (1000 Hz)	3.7	3.7	ASTM D150
Volume Resistivity(Ohm-meter)	1012	1012	ASTM D257
Flame Rating	VTM-O	VTM-O	U.L94
THERMAL
Thermal Conductivity(W/m-K)	0.9	0.9	ASTM D5470
THERMAL PERFORMANCE vs PRESSURE
Pressure(psi) 10 25 50 100 200
TO-220 Thermal Performance (℃/W) 3.66 3.43 3.13 2.74 2.42
Thermal Impedance (℃-in2/W)(1) 1.07 0.68 0.48 0.42 0.38

http://www.gdrichone.com/pid11342631/sil-pad+K-4.htm

Fiberglass Fabric Coated Silicone Rubber

The Fiberglass Fabric Coated Silicone Rubber are made of fine fiberglass with excellent capacity of high temperature and corrosion resistance, coated and rolled with silicone rubber, which is a brand new product with good performance and multiple applications.

Feature:

1.High Temperature resistance,operating temperatuue range : -70 to 260

2. Resistance to ozone, oxygen, sunlight and aging, long using life up to 10 years.

3. Good electric insulator, dielectric constant 33.2, break down voltage between 2050KV/mm,

Application:

1. Electric insulation: Silicon rubber coated fiberglass cloth features high grade of electric insulation and bear a load of high voltage. It fits for making products like insulation cloth and sleeves etc.

2. Non-metallic compensator: used as pipeline flexible coupling, non-metallic compensator helps to avoid damage caused by heat expansion and cold contraction. This membrane material specially fit for use in industries of petroleum, chemical engineering, cement, iron and steel and energy sources due to its special features of temperature resistance, anti-corrosion, anti-aging, and good elasticity and toughness.

3 It is good to be used as inner and outer anti-corrosion layer featuring excellent corrosion resistance, temperature resistance and high strength. It is proved to be an ideal anti-corrosion material.

4. Others: Apart from application above, it can also be used as sealing material, temperature resistant and anti-corrosion conveyer belt and packaging material

Gap Pad Thermally Conductive Materials

Features: can be cut into different shapes and size according to different components ,with exellent insulation , thermally conductivity ,flexibility ,and good flatness,shock-proof ,sealing ability 
Thermally conductivity :2.45--5.5W/mK
Dielectroic Breakdown Voltage :above 3000V, 
Thickness:0.5mm~13mm,such as 0.5mm　1mm　1.5mm　2mm一13mm are widely used on many kinds of electronic components operating temperatu

TO-220 TO-3P TO-247 TO-3 Silicone Cap

Description: has the function of supplementary heat dissipation, can be subsituted for original metal block.
No fixed, just set directly to low power and middle power transistor to reduce wight.
Usage: heat dissipation of common low power and middle power transistor 
Typical sizes: TO-220A、TO-220B、TO-220C、TO-3PA

LED Lighting Thermal Insulation Pad

LED lighting Thermal Insulation Pad 
1.Thermal Conductivity:1.2w/m.k 
2.Soft and cost effective solution 
3.Low stress application
LED lighting thermal pad
Features&Benefits:
1.1.2--4.5W/m.k thermal conductivity
2.Ultra soft at low Stress application
3.Naturally tacky on both sides
4.Electrically insulating 
Typical Application:
1.VGA Card,Game consoles,Notebook Chip Set
2.LED Lighting,LED Backlight TV,Wireless Hub,Memory Modules,Memory RAM Bus
3.Power suppliers(AC-DC,DC-DC,battery back-up systems)
Configurations:
•Standard size for sheet form:200x400mm
•Thickness:0.25-15.0mm
•With or without PSA
•Could be die-cut or pre-applied to heat sinks
Rohs&Reach compliance:yes,for the certificates,please contact our sales!

Ultra Soft Thermal Insulation Pad

LED Thermal pad / LED thermal gap filler pad/LED thermal conductive pad
Applications:
- Between electronic components such as Semiconductor, IC, CPU.MOS and heatsink.
- Led Lighting, LCD TV, Telecom device, Wireless Hub, Power supply etc
- Cooling Modules, Thermal modules, in all applications where a metal housing is used as heatsink.

Specification sheet

TO-220 TO-3P TO-247 TO-3 MICA

Product Name :　MICA 
Product Information: 
Features： good mechanical strength and heat-resistance 
operating temprature scope:within 600℃ 
usage ： widely used for metallurgy,chemical ,electronic products for the purpose of insulating 　 
Typical model: TO-220、TO-3P1、TO-3P2、TO-3PL、TO-3 
Notes: different models can be made at customer's request 

Sil-pad K-4

TYPICAL PROPERTIES OF SIL-PAD K-4

PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD

Color	GRAY	GRAY	Visual
Reinforcement Carrier	Kapton	Kapton	----
Thickness(inch) /(mm)	0.006	0.152	ASTM D374
Hardness (Shore A)	90	90	ASTM D2240
BreakingStrenght (ibs/inch) / (kN/m)	30	5	ASTM D1458
Elongation (%45°toWarp and Fill)	40	40	ASTM D412
Tensile Strength (psi) /(MPa)	5000	34	ASTM D412
Continuous Use Temp (℉) /（℃）	-76 to356	-60 to 180	-----
ELECTRICAL
Dielectric Breakdown Voltage(Vac)	8000	8000	ASTM D149
Dielectric Constant (1000 Hz)	3.7	3.7	ASTM D150
Volume Resistivity(Ohm-meter)	1012	1012	ASTM D257
Flame Rating	VTM-O	VTM-O	U.L94
THERMAL
Thermal Conductivity(W/m-K)	0.9	0.9	ASTM D5470
THERMAL PERFORMANCE vs PRESSURE
Pressure(psi) 10 25 50 100 200
TO-220 Thermal Performance (℃/W) 3.66 3.43 3.13 2.74 2.42
Thermal Impedance (℃-in2/W)(1) 1.07 0.68 0.48 0.42 0.38

Thermal Conductive Silicone Cloth

Description: You can stamp the heat silicon cloth to cut into your any special type as you wish. Our silica cloth has the advantages of high thermal conductivity and insulation resistance. Through stamping the silicon cloth, our thermal conductive pads are made by this way.
Usage: all kinds of thermal conductive spacer of the encapsulated heater element.
Application: RDRAMTM, CDROM, Metal chassis, Electrical equipment, heat disspation, insulation.
Typical size: 0.15T、0.18、0.2T、0.23T、0.3、0.45、0.8

BUSHING

Product Name :　Insulating tablets/insulation bushing

Product Information:

Usage ：used for tightening on the heat producing components and for insulating between metal sheet .

especially ,used on screws for insulating purppose ,

combined with the heat-eliminating pad when used Typical

specification：TO-220、TO-220A、TO-220B、TO-220C、TO-220D、TO3

Notes: different specifications are available at customer's request

http://www.gdrichone.com/pid11342616/BUSHING.htm

K10 K6 K4 Silicone PAD

Silicone PAD K4 & Silicone PAD K6 is bonded by Dupont Kapton Mt film and Silicone PAD rubber.

Kapton is for high stamping resistance and heat conducting.

SIL-PAD K10 is with the best property of thermal conducting in the film of Kapton structure.

This design is for replacing the brittle ceramic Beryllium Oxide.Boron Nitide and Alumina.

This ultrathin product is with good heat conducting, high temperature and high voltage resistance.

Usage: used to high temperature insulate for audion with high power, field-effect tube, stabilivolt module ( LM78 series, LM317 series, SANYO power source thick mould, source thick mould ), various TDA series, controllable silicon module with high power (Omron series ), integration rectification module and other electronic and heating components.

Typical specification: thickness 0.15mm (6 mill). Special thickness or nonstandard specification is also available by order.

 

http://www.gdrichone.com/pid176181/K10+K6+K4+Silicone+PAD.htm 

Thermal Silicone Soft Insulation Pad

Product Name :　Soft silicone pad/Thermal pad 
Features: can be cut into different shapes and size according to different components ,with exellent insulation , thermally conductivity ,flexibility ,and good flatness,shock-proof ,sealing ability 
Thermally conductivity :>2.45W/mK,
Dielectroic Breakdown Voltage :above 3000V, 
Thickness:0.5mm~13mm,such as 0.5mm　1mm　1.5mm　2mm一13mm are widely used on many kinds of electronic components operating temperature range :-50℃～220℃, 

• 

Thermal Silicone Soft Insulation Pad

Product Name :　Soft silicone pad/Thermal pad 
Features: can be cut into different shapes and size according to different components ,with exellent insulation , thermally conductivity ,flexibility ,and good flatness,shock-proof ,sealing ability 
Thermally conductivity :>2.45W/mK,
Dielectroic Breakdown Voltage :above 3000V, 
Thickness:0.5mm~13mm,such as 0.5mm　1mm　1.5mm　2mm一13mm are widely used on many kinds of electronic components operating temperature range :-50℃～220℃,