TO-220 TO-3P TO-247 TO-3 MICA

Product Name :　MICA 
Product Information: 
Features： good mechanical strength and heat-resistance 
operating temprature scope:within 600℃ 
usage ： widely used for metallurgy,chemical ,electronic products for the purpose of insulating 　 
Typical model: TO-220、TO-3P1、TO-3P2、TO-3PL、TO-3 
Notes: different models can be made at customer's request 

Sil-pad K-4

TYPICAL PROPERTIES OF SIL-PAD K-4

PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD

Color	GRAY	GRAY	Visual
Reinforcement Carrier	Kapton	Kapton	----
Thickness(inch) /(mm)	0.006	0.152	ASTM D374
Hardness (Shore A)	90	90	ASTM D2240
BreakingStrenght (ibs/inch) / (kN/m)	30	5	ASTM D1458
Elongation (%45°toWarp and Fill)	40	40	ASTM D412
Tensile Strength (psi) /(MPa)	5000	34	ASTM D412
Continuous Use Temp (℉) /（℃）	-76 to356	-60 to 180	-----
ELECTRICAL
Dielectric Breakdown Voltage(Vac)	8000	8000	ASTM D149
Dielectric Constant (1000 Hz)	3.7	3.7	ASTM D150
Volume Resistivity(Ohm-meter)	1012	1012	ASTM D257
Flame Rating	VTM-O	VTM-O	U.L94
THERMAL
Thermal Conductivity(W/m-K)	0.9	0.9	ASTM D5470
THERMAL PERFORMANCE vs PRESSURE
Pressure(psi) 10 25 50 100 200
TO-220 Thermal Performance (℃/W) 3.66 3.43 3.13 2.74 2.42
Thermal Impedance (℃-in2/W)(1) 1.07 0.68 0.48 0.42 0.38

Thermal Conductive Silicone Cloth

Description: You can stamp the heat silicon cloth to cut into your any special type as you wish. Our silica cloth has the advantages of high thermal conductivity and insulation resistance. Through stamping the silicon cloth, our thermal conductive pads are made by this way.
Usage: all kinds of thermal conductive spacer of the encapsulated heater element.
Application: RDRAMTM, CDROM, Metal chassis, Electrical equipment, heat disspation, insulation.
Typical size: 0.15T、0.18、0.2T、0.23T、0.3、0.45、0.8

BUSHING

Product Name :　Insulating tablets/insulation bushing

Product Information:

Usage ：used for tightening on the heat producing components and for insulating between metal sheet .

especially ,used on screws for insulating purppose ,

combined with the heat-eliminating pad when used Typical

specification：TO-220、TO-220A、TO-220B、TO-220C、TO-220D、TO3

Notes: different specifications are available at customer's request

http://www.gdrichone.com/pid11342616/BUSHING.htm

K10 K6 K4 Silicone PAD

Silicone PAD K4 & Silicone PAD K6 is bonded by Dupont Kapton Mt film and Silicone PAD rubber.

Kapton is for high stamping resistance and heat conducting.

SIL-PAD K10 is with the best property of thermal conducting in the film of Kapton structure.

This design is for replacing the brittle ceramic Beryllium Oxide.Boron Nitide and Alumina.

This ultrathin product is with good heat conducting, high temperature and high voltage resistance.

Usage: used to high temperature insulate for audion with high power, field-effect tube, stabilivolt module ( LM78 series, LM317 series, SANYO power source thick mould, source thick mould ), various TDA series, controllable silicon module with high power (Omron series ), integration rectification module and other electronic and heating components.

Typical specification: thickness 0.15mm (6 mill). Special thickness or nonstandard specification is also available by order.

 

http://www.gdrichone.com/pid176181/K10+K6+K4+Silicone+PAD.htm 

Thermal Silicone Soft Insulation Pad

Product Name :　Soft silicone pad/Thermal pad 
Features: can be cut into different shapes and size according to different components ,with exellent insulation , thermally conductivity ,flexibility ,and good flatness,shock-proof ,sealing ability 
Thermally conductivity :>2.45W/mK,
Dielectroic Breakdown Voltage :above 3000V, 
Thickness:0.5mm~13mm,such as 0.5mm　1mm　1.5mm　2mm一13mm are widely used on many kinds of electronic components operating temperature range :-50℃～220℃, 

• 

Thermal Silicone Soft Insulation Pad

Product Name :　Soft silicone pad/Thermal pad 
Features: can be cut into different shapes and size according to different components ,with exellent insulation , thermally conductivity ,flexibility ,and good flatness,shock-proof ,sealing ability 
Thermally conductivity :>2.45W/mK,
Dielectroic Breakdown Voltage :above 3000V, 
Thickness:0.5mm~13mm,such as 0.5mm　1mm　1.5mm　2mm一13mm are widely used on many kinds of electronic components operating temperature range :-50℃～220℃,